New: Otter box 1900 $74.95New: Otter box 1900 $74.95
The smallest, most versatile, most rugged, expandable PDA case on the market.
- Universal fit for newer smaller form-factor PDAs Waterproof, crushproof, drop-proof ergonomic design
- Flexible, fully sealed interactive screen membrane
- Quick access to CF and SD slots through the top of the case
- Quick access to PDA connection through the bottom of the case
- Adjustable neoprene handstrap
- External stylus holder
- Flip-up hard screen cover
- Headphone/headset access
- Unconditional lifetime guarantee
- External Dimensions 6.50"x 4.50"x 2.20"
- Internal Dimensions 5.56"x 3.50"x 0.93"
- Expandable to fit CF/SD GPS cards, mounts, and power cable access
Will it fit your PDA?... See the Fitting Guide. If it does not fit, you can always return it.
Tall GPS POD $34.95 >>
The Large POD allows for the use of larger GPS devices and other sizable CF and SD accessories while providing full environmental and impact protection. The Large POD installs in place of the standard 1900 POD lid and provides additional room inside the case to allow for GPS devices to be installed directly into the PDA while still being enclosed in the case. The Large POD allows for users to operate GPS devices in the harshest of environments without worrying about damaging expensive equipment.
The standard pod lid (included with the 1900) will fit a CF device with maximum dimensions of Length 2.17in[55mm], Width 3.0in[76mm], and Height .88in[22mm]. The large pod lid will fit a CF device with maximum dimensions of Length 4.0in[102mm], Width 3.15in[80mm], and Height .88in[22mm]. This length includes the entire CF device including the card section.
<< Medium POD $34.95
The Medium POD allows for the use of mid-size GPS devices and other CF and SD accessories while providing full environmental and impact protection. The Medium POD installs in place of the standard 1900 POD lid and provides additional room inside the case to allow for GPS devices to be installed directly into the PDA while still being enclosed in the case. The Medium POD allows for users to operate GPS devices in the harshest of environments without worrying about damaging expensive equipment.
The standard pod lid (included with the 1900) will fit a CF device with maximum dimensions of Length 2.17in[55mm], Width 3.0in[76mm], and Height .88in[22mm]. The medium pod lid will fit a CF device with maximum dimensions of Length 3.0in[77mm], Width 3.15in[80mm], and Height .88in[22mm]. This length includes the entire CF device including the card section.
Belt-Clip $19.95 >>
The Belt Clip for the 1900 provides a robust belt mounting system for on the go all day use. This holster style system securely holds the case and utilizes the removable, heavy duty Otterbox belt clip. The 1900 belt clip is an excellent solution for full time users who want quick, easy access to their PDA.
Latch Replacement Kit $9.95 (Not pictured)
The Latch Replacement kit allows users to replace broken latches. Worth getting as a precaution, as the latches can break if the case is not properly aligned when you close it.
1900 Serial POD $49.95 <<
The Serial POD adds an external serial connection and charging point to the case. The serial POD only works with HP iPAQs which have the standard 22-pin connector on the bottom. The POD easily installs in place of the rubber plug on the bottom of the 1900. Null modem style serial devices (GPS, survey equipment, etc.) can be connected to the PDA through the DB9 serial connection on the POD. The POD can also be used to sync the PDA when used with a null modem adapter. A 4mm power jack is incorporated into the POD so that the PDA may be charged using the standard HP iPAQ power adapter without removing it from the case.
Note: The serial connection is rated as water-resistant, not water proof. The case is not submersible with the serial pod attached. The integrated cap can be used to cover the connections when they are not in use.
1900 Cable-Pass-Through Kit $39.95 >>
The through the box connectivity kit allows for multiple sizes of cables, power, sync, GPS, printers, etc. to pass through the case and connect to your PDA. The kit attaches easily to the case and works with all PDA models. Includes built in strain relief so that pulling on cables does not damage your PDA.
Note: This kit is rated as water-resistant, not water proof. The case is not submersible with this kit attached.
Vehicle Mounting Kit $19.95 (Not pictured)
The vehicle mount adapter allows you to mount your 1900 PDA case onto any vehicle using a Ram 101 style mount (available separately from www.ram-mounts.com). The mount holds your 1900 PDA case securely while still allowing the case to be easily and completely removed from the mount. Includes mount and all necessary hardware. Can also be used for your own custom mounting solutions.