Choose from 16 different styles of Holder...
and four different styles of Mount.
Our interPDA mount system allows you to configure your own mounting solution, with a choice of 16 different "holders" and five different "mounts". The holder is the part that supports the PDA or other device, and the mount attaches it your dash, windshield, etc.
|
Choose from 16 different styles of Holder... |
and four different styles of Mount. |
These holders are
custom made for a sleek individual fit for your make of Pocket PC (with
or without expansion sleeve) . The PDA simply slides into the holder,
and is held in place by gravity and friction (Because the PDA is not positively
clamped, we don't recommend these holders for high-vibration environments,
but they are fine in a car and most boats).
Pictured with suction mount and PDA (sold separately).
Select your model of PDA from the list below.
(For the Navman GPS sleeve, select the iPaq with single expansion pack).
These holders have a clamp mechanism that grips the PDA securely. Squeeze the padded arms together to clamp. Press the button and the arms spring open. The mounting option is not included. Select a mounting kit below. These holders work great with Aquapac bags, for a secure, waterproof mounting.
|
PDA Holder
Suitable for most PDA Units. Mounting kit sold separately. Accepts units 27/8" to 4" wide and up to 11/4" deep. $19.99
|
Small GPS/Phone Holder
Holder suitable for mounting small cell-phones or GPS units. Recommended for units between 13/8" - 23/8" wide. Mounting kit sold separately $12.99
|
|
Twin Holder
Allows you to attach any two holders (Eg, PDA and GPS) side by side, to a single mount. If you want to place two PDAs side-by-side, use the custom Quickmounts - they are narrower. $4.99
|
ADHESIVE MOUNTING PAD
A strong adhesive pad to attach any item to one of our mounts. Suitable for permanent mounting only. Adhesive pad is 11/2" by 21/8". Mounting kits sold separately. $3.99
|
|
SUCTION MOUNT
Flexible arm with Suction Mount. Easily bent to any angle. Suitable for use on glass. Includes a self-adhesive plastic disk for mounting on a rough or porous surface. (pictured with phone holder, sold separately). $16.99
|
TILT/SWIVEL MOUNT
Secures with screws or strong adhesive pads. Mounting area required 75mm x 55mm. Horizontal rotation 360º. Vertical rotation approx 30º. $16.99
|
|
DOUBLE SUCTION MOUNT
Two vacuum suckers for additional mounting strength. (pictured with PDA Holder, sold separately). $16.99
|
SCREW MOUNT
Flexible arm with Screw Mount for a really secure fixing. Mounting area 27/8" by 21/8" $16.99
|
PDA mounting tips:
No mount is 100% secure: we recommend using a safety lanyard if a fall would damage or lose a valuable device.
For suction mounts, clean the glass and the sucker with an alcohol prep pad (we supply one with each mount). Our suction mount is 30% larger than the one supplied with the Navman GPS sleeve, and is very secure if properly applied.
Avoid repeated bending of the flexible arms. They will work-harden and break after many cycles.
The mounts and holders snap together very securely, but repeated disassembly will loosen them.
